Sections [651] to [682]: Remote Controls 1 to 32 respectively 

1. Press the [ENTER] key. 

2. Enter your [INSTALLER CODE] (default: 0000 / 000000) or [MAINTENANCE CODE] (empty by default) 

3. Enter the desired [SECTION NUMBER] (from sections [651] to [682]). 

4. Enter the six-digit serial number of the remote or press any button on the remote twice.

Note that when using your user code to program, the user code used must be enabled to program codes. Also this operation requires a RTX3 to be installed onto the system.